ITM 6.1 install on IBM blades (intel) running RHEL 4

[Vashisht, Ashish]

Hi list

it is probably a lame question; but i couldn't find Install image for
ITM 6.1 Monitoring server.
i downloaded "C86CTIE-IBM Tivoli Monitoring V6.1 (Vol. 4 Linux Intel
Platforms - Red Hat and SusE) English International" but it doesn't
install the Server.
Another question: can TDW2.1 use Oracle 10G?

Would appreciate if some one can point me in right direction.


Ashish Vashisht

[j***@gulfsoft.com]

Did you run the install.sh script?

Also, the TDW should support 9.2 or higher...

John Willis
www.gulfsoft.com/blog

Check out the new ITM 6.1 Implementers class
http://www.gulfsoft.com/modules.php?op=modload&name=News&file=article&sid=161&mode=thread&order=0&thold=0

Post by Vashisht, Ashish
Hi list
it is probably a lame question; but i couldn't find Install image for
ITM 6.1 Monitoring server.
i downloaded "C86CTIE-IBM Tivoli Monitoring V6.1 (Vol. 4 Linux Intel
Platforms - Red Hat and SusE) English International" but it doesn't
install the Server.
Another question: can TDW2.1 use Oracle 10G?
Would appreciate if some one can point me in right direction.
Ashish Vashisht

[Vashisht, Ashish]

Yes I tried running install.sh


[***@tivoliSetup C86CTIE]# ./install.sh
\nEnter the name of the IBM Tivoli Monitoring directory
[ default = /opt/IBM/ITM ]: \c

\nITM home directory "/opt/IBM/ITM" already exists.
OK to use it [ y or n; "y" is default ]? \c
y
\nSelect one of the following: \n
1) Install products to the local host.
2) Install products to depot for remote deployment (requires TEMS).
3) Exit install.
\nPlease enter a valid number: \c
2

install.sh failure: No Tivoli Enterprise Monitoring Server (TEMS) is
installed under /opt/IBM/ITM.
[***@tivoliSetup C86CTIE]#




Ashish Vashisht




-----Original Message-----
From: owner-tme10-***@public.gmane.org [mailto:owner-tme10-***@public.gmane.org]
On Behalf Of john_willis-9LkaxTQlAnxWk0Htik3J/***@public.gmane.org
Sent: Wednesday, March 15, 2006 10:53 AM
To: tme10-***@public.gmane.org
Subject: Re: [tme10] ITM 6.1 install on IBM blades (intel) running RHEL
4

Did you run the install.sh script?

Also, the TDW should support 9.2 or higher...

John Willis
www.gulfsoft.com/blog

Check out the new ITM 6.1 Implementers class
http://www.gulfsoft.com/modules.php?op=modload&name=News&file=article&si
d=161&mode=thread&order=0&thold=0

Post by Vashisht, Ashish
Hi list
it is probably a lame question; but i couldn't find Install image for
ITM 6.1 Monitoring server.
i downloaded "C86CTIE-IBM Tivoli Monitoring V6.1 (Vol. 4 Linux Intel
Platforms - Red Hat and SusE) English International" but it doesn't
install the Server.
Another question: can TDW2.1 use Oracle 10G?
Would appreciate if some one can point me in right direction.
Ashish Vashisht

[Dr. Frank Tate, Ph.D.]

According to the online documentation at:
http://publib.boulder.ibm.com/infocenter/tivihelp/v3r1/topic/com.ibm.itm.doc/itm_install82.htm

you should select option 1 to "Install products to the local host" to
start the
installation.

The root of the Monitoring documentation is located at:

http://publib.boulder.ibm.com/infocenter/tivihelp/v3r1/index.jsp?toc=/com.ibm.itm.doc/toc.xml

-- Frank

Post by Vashisht, Ashish
Yes I tried running install.sh
\nEnter the name of the IBM Tivoli Monitoring directory
[ default = /opt/IBM/ITM ]: \c
\nITM home directory "/opt/IBM/ITM" already exists.
OK to use it [ y or n; "y" is default ]? \c
y
\nSelect one of the following: \n
1) Install products to the local host.
2) Install products to depot for remote deployment (requires TEMS).
3) Exit install.
\nPlease enter a valid number: \c
2
install.sh failure: No Tivoli Enterprise Monitoring Server (TEMS) is
installed under /opt/IBM/ITM.
Ashish Vashisht
-----Original Message-----
Sent: Wednesday, March 15, 2006 10:53 AM
Subject: Re: [tme10] ITM 6.1 install on IBM blades (intel) running RHEL
4
Did you run the install.sh script?
Also, the TDW should support 9.2 or higher...
John Willis
www.gulfsoft.com/blog
Check out the new ITM 6.1 Implementers class
http://www.gulfsoft.com/modules.php?op=modload&name=News&file=article&si
d=161&mode=thread&order=0&thold=0

Post by Vashisht, Ashish
Hi list
it is probably a lame question; but i couldn't find Install image for
ITM 6.1 Monitoring server.
i downloaded "C86CTIE-IBM Tivoli Monitoring V6.1 (Vol. 4 Linux Intel
Platforms - Red Hat and SusE) English International" but it doesn't
install the Server.
Another question: can TDW2.1 use Oracle 10G?
Would appreciate if some one can point me in right direction.
Ashish Vashisht

[Vashisht, Ashish]

Yep you were right... for some reason I would go till that point and
think hey I don't get to install Server and that it is just for agents..

Thanks for your help...

regards
Ashish Vashisht

-----Original Message-----
From: owner-tme10-***@public.gmane.org [mailto:owner-tme10-***@public.gmane.org]
On Behalf Of Dr. Frank Tate, Ph.D.
Sent: Wednesday, March 15, 2006 1:11 PM
To: tme10-***@public.gmane.org
Subject: RE: [tme10] ITM 6.1 install on IBM blades (intel) running RHEL
4

According to the online documentation at:
http://publib.boulder.ibm.com/infocenter/tivihelp/v3r1/topic/com.ibm.itm
.doc/itm_install82.htm

you should select option 1 to "Install products to the local host" to
start the
installation.

The root of the Monitoring documentation is located at:

http://publib.boulder.ibm.com/infocenter/tivihelp/v3r1/index.jsp?toc=/co
m.ibm.itm.doc/toc.xml

-- Frank

Post by Vashisht, Ashish
Yes I tried running install.sh
\nEnter the name of the IBM Tivoli Monitoring directory
[ default = /opt/IBM/ITM ]: \c
\nITM home directory "/opt/IBM/ITM" already exists.
OK to use it [ y or n; "y" is default ]? \c
y
\nSelect one of the following: \n
1) Install products to the local host.
2) Install products to depot for remote deployment (requires TEMS).
3) Exit install.
\nPlease enter a valid number: \c
2
install.sh failure: No Tivoli Enterprise Monitoring Server (TEMS) is
installed under /opt/IBM/ITM.
Ashish Vashisht
-----Original Message-----
Sent: Wednesday, March 15, 2006 10:53 AM
Subject: Re: [tme10] ITM 6.1 install on IBM blades (intel) running

RHEL

Post by Vashisht, Ashish
4
Did you run the install.sh script?
Also, the TDW should support 9.2 or higher...
John Willis
www.gulfsoft.com/blog
Check out the new ITM 6.1 Implementers class

http://www.gulfsoft.com/modules.php?op=modload&name=News&file=article&si

Post by Vashisht, Ashish
d=161&mode=thread&order=0&thold=0

Post by Vashisht, Ashish
Hi list
it is probably a lame question; but i couldn't find Install image for
ITM 6.1 Monitoring server.
i downloaded "C86CTIE-IBM Tivoli Monitoring V6.1 (Vol. 4 Linux Intel
Platforms - Red Hat and SusE) English International" but it doesn't
install the Server.
Another question: can TDW2.1 use Oracle 10G?
Would appreciate if some one can point me in right direction.
Ashish Vashisht